Download

This Telemetry Script measures the time Open TX takes to run through one cycle of its software.  You will note that running the script in Companion gives a different result than running the script in Taranis because the software is running in a processor with a different operating speed.

This is a useful practice script for learning how Lua scripts work but has no use in operating a ....

Download

LuaPilot is a nice Telemetry

Created
Size
Downloads

Download

1. Anzeige der Höhe + max
2. Anzeige RSSI als Balken (keine Grafiken ....
   
   
   

Download

Script to "lag" a source.  Collects source and returns it later. set source required.  Set delay required in times - 1 to 100 in steps of approx 30milliseconds.

Download

This script calculates models ascend/descend rate in m/min.

Download

Telemetry script for IRIS+ showing:

• altitude
• speed
• heading
• battery voltage and current
• current flight mode
• number of GPS satellites
• timer 2 (you can easily change to timer 1 or remove it)

Download

Download

Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 transmitters using FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry.  Compatible with INAV and Betaflight.

Download

GPS Heading calculation script.

Download

this telemetry lua nigelsheffield will give a 30 min graph of alt, each time timer 1 is reset the flight time and max alt is recorded, with 6 last flights on left and the 3 best times recorded on right.

1.2 added personal best which saves your best ever time in gvar 6 fm9 which you need to set to -1000 to zero ....

Download

Download

Fully functional script using FrSky S.Port pasthrough from Pixhawk to Taranis XD9+:

A. Flight Mode, UAV battery voltage, TX battery voltage, timer1 info (mine counts from first thrust).

B. Ground speed in Km/h.

C. GPS altitude.

D. Messages received and severity. Up to 10 messages are recorded in a FIFO buffer. Number indicates order from 0, last message, to 10, ....

Download

Telemetry screen is based on FrSky FAS-100 Current/Voltage/Consumption/Power Sensor.

-- RSSI
-- Voltage (vFas), minimum voltage (vFas-min)
-- Consumption
-- Current and maximum current
-- Average current based on Consumption and Timer 1 (telem1.lua)
-- Average current based on averaging current samples (telem2.lua)
-- Maximum power

Download

LUA telemetry script for F5J training

1.01 Corrects the timer voice problems thanks to the updates in openTX 2.0.13 (so, this is now required)

Download

F3K Training script   3.02

This script provides timing for all the F3K tasks except Poker.

Updates in 3.02:

• Added AULD.
• Fixed a regression introduced in 3.00 where a false launch could be detected when running the same task more than ....
  
  
  

Download

Just check RCGROUPS for details and latetst versions

Completely new F3K training scripts, menu driven. 

http://www.rcgroups.com/forums/member.php?u=577751

• Flight altitude graphs
• complete task list
• Created
  Size
  Downloads

Download

Launch your F3K plane and the friendly lady announces your launch height.

V1.1 "imperial" units added
V1.2 the lady announces "feet" and not "meter" if switched to imperial  
V1.3 adapted to 2.2.1

Download

This script is for F3X sailplanes with flaps. It allows the pilot to adjust snapflap deadband using a transmitter control (typically S1/S2).

- Deadband adjustable via transmitter control

- Elevator position for max snapflap can be altered

- Drop-in replacement for a conventional snapflap mix

- Fully documented code

Download

Engine Sound Generator [P-51D]

Copy EngSnd.lua file to the SCRIPTS\FUNCTIONS\
*.wav file to the SOUNDS\en\

User need to create Special function "SFx SE- Lua Script EngSnd".
If you turn on "SE-" then script will create SF in SF63.

refer youtube clip for action.

Download

this telemetry lua by nigelsheffield  http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259  is a simple increasing timer target game, as is target time starts at 10 seconds and goes up 5 seconds each time target is hit, after 10 hits the game is over and timer 2 value is used to give score.

1.2 fixed ready for changes in opentx 2.1

for it to work you must ....

Download

This telemetry script plots each flight for review before the next launch.

Based on the script of filago (http://rcsettings.com/index.php/viewdownload/13-lua-scripts/217-dlg-flight-graph-for-opentx-2-0-x)

Download

This telemetry script auto-scales both the time and altitude in real time as needed to fit all data.  Has separate launch height and max height, demo mode, and ..

Download

Telemetry script with icons for the DJI phantom and NAZA flight controllers. 

Download

A telemetry script to combine switches and inputs with custom names and a bitmap. Values can be represented in text or bars

Configuration with a text file for each model

Unzip the file content in your TELEMETRY folder

Inside the folder SrcMod place the config file and bmp for each model. Use same filename as the model name

See example of config file and adjust ....

Download

Adapted from the example provided in the Lua Reference Guide for OpenTX 2.1

The default voice countdown caller of OpenTX 2.1 works quite well for FxJ thermal ....