R/C Settings
Overview Search Downloads Submit file Up
Download details
Taranis Blade 350 QX 2.0 Version:2.0
(6 votes)

Alright  just updated my Blade 350 QX with firmware 2.0

This is a work in progress

SF - UP Throttle hold (throttle kill)

SF- DOWN Throttle release (you need to have this switch down to start motors)

 

SA - Master mode switch

SA - UP - Stability Mode

SA - MID - Smart/AP/Agility (Acro) (use SB to select)

SA - DOWN - RTL

 

SB - Secondary mode switch

SB - UP - Smart Mode

SB - MID - AP mode

SB - DOWN - AGILITY Mode (Acro)

 

SC - HIGH/MED/LOW rates (MUST BE IN HIGH RATES TO START MOTORS)

 

Flight modes 1-5 have been set up so when you use the switches it will display on the screen which flight mode you are in.  I haven't recorded any wav files for the flight modes yet.

The reason I set up the mode switches the way I did is so i can easly switch to Stability mode or RTL quickly.  Switch SA overrides switch SB.

I also had my sliders and pots controlling ELE, AIL, and RUD +25% when in AP mode but i removed that from this EEPE to make it simple. I used them for very fine constant movement when filming. Let me know if anyone wants it.

Let me know what you think of the set-up!

Enjoy!




Data

Size 764.52 KB
Downloads 3269
Created 2014-05-09
Created by SLaSH
Changed at
Modified by

View Model Details

Download

Comments   

 
#29 Rafal Kiermacz 2019-09-26 20:51
Hello, I know I'm very very late to this game but I just bought a 350 QX2 (for $35) I'm trying to get it to arm the motors and all it ever does is the very short and quick beeps. They only stop in this switch configuration:
SF UP (armed)
SA MID
SB MID
which puts the copter in AP Mode.
they also stop beeping in this switch configuration:
SF UP (armed)
SA and SB in any possition
Throttle CH1 at exact 0 (middle)
from here moving rudder CH2 (left or right) starts beeping again.

I'm in high rates with all Channels operating between -100 and 100.

I'm trying to arm by moving both sticks down and in. Or by moving the throttle stick left and right while SF DOWN.

Motors don't want to arm... any help?
 
 
#28 Werner Kremsreiter 2016-05-24 07:55
Hello,
now the binding is o.K. But the motors don´t will run. Do you know this problem?
werner
 
 
#27 Werner Kremsreiter 2016-05-21 20:50
Hello,
I have this module. But it don´t like to bind with the copter. Do you have any ideas for me?
Thank you.
Werner
 
 
+1 #26 Kevin Smith 2016-04-27 16:05
That's the one!


Quoting Werner Kremsreiter:
Quoting Kevin Smith:
Quoting Werner Kremsreiter:
Hello, I am new here. Please can you tell me witch module you use in the Tamaris to bind the Blade 350 QX2. Thank you.


The OrangeRx Module from HobbyKing

Hello,
is this the right module?
http://www.hobbyking.com/hobbyking/store/__46634__OrangeRX_DSMX_DSM2_Compatible_2_4Ghz_Transmitter_Module_JR_Turnigy_.html
Thanks
Werner
 
 
#25 Werner Kremsreiter 2016-04-27 12:09
Quoting Kevin Smith:
Quoting Werner Kremsreiter:
Hello, I am new here. Please can you tell me witch module you use in the Tamaris to bind the Blade 350 QX2. Thank you.


The OrangeRx Module from HobbyKing

Hello,
is this the right module?
http://www.hobbyking.com/hobbyking/store/__46634__OrangeRX_DSMX_DSM2_Compatible_2_4Ghz_Transmitter_Module_JR_Turnigy_.html
Thanks
Werner
 
 
+1 #24 Kevin Smith 2016-04-25 12:08
Quoting Werner Kremsreiter:
Hello, I am new here. Please can you tell me witch module you use in the Tamaris to bind the Blade 350 QX2. Thank you.


The OrangeRx Module from HobbyKing
 
 
#23 Werner Kremsreiter 2016-04-25 11:36
Hello, I am new here. Please can you tell me witch module you use in the Tamaris to bind the Blade 350 QX2. Thank you.
 
 
#22 Alex 2015-10-14 10:47
I am using a hack module using a Spektrum DX5 RF board. I had to make a few tweaks to your program in ordere to get it too work. If anyone wants a copy then I will post it.

Thanks for all the hard work.
 
 
#21 Alex 2015-10-11 11:30
I have read that the servos should be set at 80% to match Spektrum travel, I noticed in your settings thatb they are 100%.

Does this this make any difference?
 
 
#20 Jim Rice 2015-04-05 01:35
Thanks Paul, much Appreaciated, Jim Rice
 

You have no rights to post comments