Alright  just updated my Blade 350 QX with firmware 2.0

This is a work in progress

SF - UP Throttle hold (throttle kill)

SF- DOWN Throttle release (you need to have this switch down to start motors)

SA - Master mode switch

SA - UP - Stability Mode

SA - MID - Smart/AP/Agility (Acro) (use SB to select)

SA - DOWN - RTL

SB - Secondary mode switch

SB - UP - Smart Mode

SB - MID - AP mode

SB - DOWN - AGILITY Mode (Acro)

SC - HIGH/MED/LOW rates (MUST BE IN HIGH RATES TO START MOTORS)

Flight modes 1-5 have been set up so when you use the switches it will display on the screen which flight mode you are in.  I haven't recorded any wav files for the flight modes yet.

The reason I set up the mode switches the way I did is so i can easly switch to Stability mode or RTL quickly.  Switch SA overrides switch SB.

I also had my sliders and pots controlling ELE, AIL, and RUD +25% when in AP mode but i removed that from this EEPE to make it simple. I used them for very fine constant movement when filming. Let me know if anyone wants it.

Let me know what you think of the set-up!

Enjoy!