Download

Vario Telemetry Screen

Altimeter, VSpeed gauge, and max/min height

Updated to work on OpenTX 2.1

Download

Line UP Modell Up

Line Down Modell Down

Download

FrSky digital telemetry sensors like the FLVS report flight pack cell voltages at 0.01V resolution. You can display this value on telemetry screens, but the voice announcements will round off to the nearest 0.1V. This script gives you the full audible value. Works in 2.1.3.

Download

Toggle.zip contains four OpenTX Lua Mix scripts which can be used to enhance the output of either a two position or three position switch.  I have included an eepe file to show how the functions can be used.  Toggles_Lua sets up a model which can demonstrate the mix scripts, Toggles_LS shows how to do the same thing with Logical Switches

Download

This is a telemetry script to average out your throttle so I can see what my average throttle input is for my quad.

Download

• Decide per model if you want a script active or not

More on www.justfly.solutions/index.php/full-repository

Download

telemtry screen for sail boat like iom 

display A1 tx voltage rssi with gauge

Download

Switch Lua-Script

Download

This Snake game script replaces the previous Snake game submission, only to change the graphics from ASCII art graphics to bmp graphics.  The gameplay continues to be the same.

Use the Right stick up and down to command the snake to move up or down.

Use the Left stick left or right to command the snake to move left or right.

Use the Right stick to restart the game once ..

Download

Smooth channel by Lua Script

Demo on gimbal tilt:

Description not finish

Download

By Nigelsheffield.

Just a simple stop watch shows current time and last time and speaks the lap time as switch H is pulled and resets and carries on timing next lap.

Gives spoken to 10th sec lap time and a screen record to 1/100th.

use switch H but easily changed in script with a text editor.

version 1.1 gives longer run time and uses minutes ....

Download

This is a simple Background Music Player which creates a Special Function at the  position of your choice and starts playing 1 out of 10 bgndmusic.wav files as soon as Switch E is in the "UP" position. While Switch E is in the "MIDDLE" position, it shuffels around in your array of the 10 music files. See the comments in music.lua to expand your number of files or change the play/shuffel ....

Download

A updated more customisable user-friendly version of the original Simple Background Music Player.

Download

This gives you up to 6 independent switches which can be toggled in sequence by 2 switches.

Download

use switch H to play sounds in a sequence, each time it is pulled next sound file in list is played, long press resets.

1.3 updated to allow changing to logical switches by altering one small line of script.

1.2 updated ready for opentx 2.1 update

1.1 repeats cycle and is layed out different;y using a single line for input of sound files.

can be a function lua ....

Download

This Mix script, called secursw.lua, creates an unKnockable safety like the one described by MattyB, a two position switch from a three position switch to be used where you want a control which cannot be inadvertantly activated by a bump.  It is a simple but interesting introduction to Lua script programming.

Download

SayAlt is a simple mix script to announce Altitude as the aircraft passes through the chosen altitude increments, either passing Up or Down.  It assumes the Taranis is using the FrSky Altimeter.  The script watches for the altitude transition and triggers a Logical Switch which then triggers a Special Function to make the voice announcement.

Download

This srcipt alert you when the distance of your airplane and a GPS point is less than a distance.

Download

This one-time script help you to calculate the Center of Gravity (COG) of your airplane.

Download

This telemetry script monitors some key values concerning electric powered aircraft.  It is telem7 for my use  and must be in /SCRIPTS/modelname/telem1-to-7

USE THE DATA WITH CAUTION!

Download

3 Telemetry Script in french with sounds and BMP

4 script for configure fonctions

3 script de telemetrie en francais avec son et images

4 scripts de configuration

Les scripts fonctionnent en 2.0.19

Power Panel

Rssi Log's

Power Log's

Download

OpenLUA-plane - OpenTx 2.2 - Taranis X9d+

Download

Modified #2 Lua from OpenTX website. 

It only requires TX + RX and FLVS (voltage) sensor.Created
Size
Downloads

Download

Download

This Telemetry Script measures the time Open TX takes to run through one cycle of its software.  You will note that running the script in Companion gives a different result than running the script in Taranis because the software is running in a processor with a different operating speed.

This is a useful practice script for learning how Lua scripts work but has no use in operating a ....