Download

Line UP Modell Up

Line Down Modell Down

Download

by nigelsheffield,

This is a function script and will speak the average altitude of each thermal /D.S. ciruit,

It works by getting the bottom height and then the top height then announcing the average number of the 2,

it does this repeatedly for each circuit, so have it on a custom function on a switch to use as you wish.

I have included instructions in the ....

Download

By Nigelsheffield.

Just a simple stop watch shows current time and last time and speaks the lap time as switch H is pulled and resets and carries on timing next lap.

Gives spoken to 10th sec lap time and a screen record to 1/100th.

use switch H but easily changed in script with a text editor.

version 1.1 gives longer run time and uses minutes ....

Download

LUA telemetry script for F5J training

1.01 Corrects the timer voice problems thanks to the updates in openTX 2.0.13 (so, this is now required)

Download

F3K Training script   3.02

This script provides timing for all the F3K tasks except Poker.

Updates in 3.02:

• Added AULD.
• Fixed a regression introduced in 3.00 where a false launch could be detected when running the same task more than ....
  
  
  

Download

This script will send all the stick positions for the various Cleanflight Controls such as PID profile changes, calibrations, acc trims and the save settings.

Download

Telemetry script for IRIS+ showing:

• altitude
• speed
• heading
• battery voltage and current
• current flight mode
• number of GPS satellites
• timer 2 (you can easily change to timer 1 or remove it)

Download

This telemetry script auto-scales both the time and altitude in real time as needed to fit all data.  Has separate launch height and max height, demo mode, and ..

Download

• Decide per model if you want a script active or not

More on www.justfly.solutions/index.php/full-repository

Download

FrSky digital telemetry sensors like the FLVS report flight pack cell voltages at 0.01V resolution. You can display this value on telemetry screens, but the voice announcements will round off to the nearest 0.1V. This script gives you the full audible value. Works in 2.1.3.

Download

LuaPilot is a nice Telemetry

Created
Size
Downloads

Download

This script calculates models ascend/descend rate in m/min.

Download

Launch your F3K plane and the friendly lady announces your launch height.

V1.1 "imperial" units added
V1.2 the lady announces "feet" and not "meter" if switched to imperial  
V1.3 adapted to 2.2.1

Download

Download

Just check RCGROUPS for details and latetst versions

Completely new F3K training scripts, menu driven. 

http://www.rcgroups.com/forums/member.php?u=577751

• Flight altitude graphs
• complete task list
• Created
  Size
  Downloads

Download

A updated more customisable user-friendly version of the original Simple Background Music Player.

Download

Displays up to 12s Lipos and the sum of all cells. Receiver voltage and lowest lipo cell voltage from each lipo sensor. Optional RPM and temperature if only on lipo sensor is connected.

Download

3 Telemetry Script in french with sounds and BMP

4 script for configure fonctions

3 script de telemetrie en francais avec son et images

4 scripts de configuration

Les scripts fonctionnent en 2.0.19

Power Panel

Rssi Log's

Power Log's

Download

Adapted from the example provided in the Lua Reference Guide for OpenTX 2.1

The default voice countdown caller of OpenTX 2.1 works quite well for FxJ thermal ....

Download

This Mix script, called secursw.lua, creates an unKnockable safety like the one described by MattyB, a two position switch from a three position switch to be used where you want a control which cannot be inadvertantly activated by a bump.  It is a simple but interesting introduction to Lua script programming.

Download

This telemetry script plots each flight for review before the next launch.

Based on the script of filago (http://rcsettings.com/index.php/viewdownload/13-lua-scripts/217-dlg-flight-graph-for-opentx-2-0-x)

Download

Toggle.zip contains four OpenTX Lua Mix scripts which can be used to enhance the output of either a two position or three position switch.  I have included an eepe file to show how the functions can be used.  Toggles_Lua sets up a model which can demonstrate the mix scripts, Toggles_LS shows how to do the same thing with Logical Switches

Download

This Telemetry Script measures the time Open TX takes to run through one cycle of its software.  You will note that running the script in Companion gives a different result than running the script in Taranis because the software is running in a processor with a different operating speed.

This is a useful practice script for learning how Lua scripts work but has no use in operating a ....

Download

This Snake game script replaces the previous Snake game submission, only to change the graphics from ASCII art graphics to bmp graphics.  The gameplay continues to be the same.

Use the Right stick up and down to command the snake to move up or down.

Use the Left stick left or right to command the snake to move left or right.

Use the Right stick to restart the game once ..

Download

SayAlt is a simple mix script to announce Altitude as the aircraft passes through the chosen altitude increments, either passing Up or Down.  It assumes the Taranis is using the FrSky Altimeter.  The script watches for the altitude transition and triggers a Logical Switch which then triggers a Special Function to make the voice announcement.