Download

Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 transmitters using FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry.  Compatible with INAV and Betaflight.

Download

OpenLUA-plane - OpenTx 2.2 - Taranis X9d+

Download

Was Change Sensor Id. Lua script to change Frsky sensor configuration from the radio (ported from erskyTx. Thanks to MikeB)

Download

This gives you up to 6 independent switches which can be toggled in sequence by 2 switches.

Download

A telemetry script to combine switches and inputs with custom names and a bitmap. Values can be represented in text or bars

Configuration with a text file for each model

Unzip the file content in your TELEMETRY folder

Inside the folder SrcMod place the config file and bmp for each model. Use same filename as the model name

See example of config file and adjust ....

Download

Fully functional script using FrSky S.Port pasthrough from Pixhawk to Taranis XD9+:

A. Flight Mode, UAV battery voltage, TX battery voltage, timer1 info (mine counts from first thrust).

B. Ground speed in Km/h.

C. GPS altitude.

D. Messages received and severity. Up to 10 messages are recorded in a FIFO buffer. Number indicates order from 0, last message, to 10, ....

Download

A Lua script developed by Heisenberg and published on the French frskytaranis.forumactif.org forum allows users of an FLVSS or MLVSS LiPo battery sensor to check the voltage level of ....

Download

Download

Download

SayAlt is a simple mix script to announce Altitude as the aircraft passes through the chosen altitude increments, either passing Up or Down.  It assumes the Taranis is using the FrSky Altimeter.  The script watches for the altitude transition and triggers a Logical Switch which then triggers a Special Function to make the voice announcement.

Download

This Snake game script replaces the previous Snake game submission, only to change the graphics from ASCII art graphics to bmp graphics.  The gameplay continues to be the same.

Use the Right stick up and down to command the snake to move up or down.

Use the Left stick left or right to command the snake to move left or right.

Use the Right stick to restart the game once ..

Download

This Telemetry Script measures the time Open TX takes to run through one cycle of its software.  You will note that running the script in Companion gives a different result than running the script in Taranis because the software is running in a processor with a different operating speed.

This is a useful practice script for learning how Lua scripts work but has no use in operating a ....

Download

Toggle.zip contains four OpenTX Lua Mix scripts which can be used to enhance the output of either a two position or three position switch.  I have included an eepe file to show how the functions can be used.  Toggles_Lua sets up a model which can demonstrate the mix scripts, Toggles_LS shows how to do the same thing with Logical Switches

Download

This telemetry script plots each flight for review before the next launch.

Based on the script of filago (http://rcsettings.com/index.php/viewdownload/13-lua-scripts/217-dlg-flight-graph-for-opentx-2-0-x)

Download

This Mix script, called secursw.lua, creates an unKnockable safety like the one described by MattyB, a two position switch from a three position switch to be used where you want a control which cannot be inadvertantly activated by a bump.  It is a simple but interesting introduction to Lua script programming.

Download

Adapted from the example provided in the Lua Reference Guide for OpenTX 2.1

The default voice countdown caller of OpenTX 2.1 works quite well for FxJ thermal ....

Download

3 Telemetry Script in french with sounds and BMP

4 script for configure fonctions

3 script de telemetrie en francais avec son et images

4 scripts de configuration

Les scripts fonctionnent en 2.0.19

Power Panel

Rssi Log's

Power Log's

Download

Displays up to 12s Lipos and the sum of all cells. Receiver voltage and lowest lipo cell voltage from each lipo sensor. Optional RPM and temperature if only on lipo sensor is connected.

Download

A updated more customisable user-friendly version of the original Simple Background Music Player.

Download

Just check RCGROUPS for details and latetst versions

Completely new F3K training scripts, menu driven. 

http://www.rcgroups.com/forums/member.php?u=577751

• Flight altitude graphs
• complete task list
• Created
  Size
  Downloads

Download

Download

Launch your F3K plane and the friendly lady announces your launch height.

V1.1 "imperial" units added
V1.2 the lady announces "feet" and not "meter" if switched to imperial  
V1.3 adapted to 2.2.1

Download

This script calculates models ascend/descend rate in m/min.

Download

LuaPilot is a nice Telemetry

Created
Size
Downloads

Download

FrSky digital telemetry sensors like the FLVS report flight pack cell voltages at 0.01V resolution. You can display this value on telemetry screens, but the voice announcements will round off to the nearest 0.1V. This script gives you the full audible value. Works in 2.1.3.