Download

same as my other one but in feet for us stuck in the dark ages lol.

by nigelsheffield    http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259

3.2 auto compensation for drift of altimeter readings, every time you throw it gets the zero offset height,  you can see 2 altimeter readings one on left is actual ....

Download

Adapted from the example provided in the Lua Reference Guide for OpenTX 2.1

The default voice countdown caller of OpenTX 2.1 works quite well for FxJ thermal ....

Download

this telemetry lua by nigelsheffield  http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259  is a simple increasing timer target game, as is target time starts at 10 seconds and goes up 5 seconds each time target is hit, after 10 hits the game is over and timer 2 value is used to give score.

1.2 fixed ready for changes in opentx 2.1

for it to work you must ....

Download

Telemetry screen is based on FrSky FAS-100 Current/Voltage/Consumption/Power Sensor.

-- RSSI
-- Voltage (vFas), minimum voltage (vFas-min)
-- Consumption
-- Current and maximum current
-- Average current based on Consumption and Timer 1 (telem1.lua)
-- Average current based on averaging current samples (telem2.lua)
-- Maximum power

Download

LUA telemetry script for F5J training

1.01 Corrects the timer voice problems thanks to the updates in openTX 2.0.13 (so, this is now required)

Download

This script calculates models ascend/descend rate in m/min.

Download

This is a "modded" version of the Automatic Cell detection Script.

Use to automatically set the alarm (low and critical) voltages of A1, A2, A3 or A4, dependant on the number of cells used

Updated to work with future releases of Open-TX

Download

Script to "lag" a source.  Collects source and returns it later. set source required.  Set delay required in times - 1 to 100 in steps of approx 30milliseconds.

Download

this telemetry lua nigelsheffield will give a 30 min graph of alt, each time timer 1 is reset the flight time and max alt is recorded, with 6 last flights on left and the 3 best times recorded on right.

1.2 added personal best which saves your best ever time in gvar 6 fm9 which you need to set to -1000 to zero ....

Download

telemtry screen for sail boat like iom 

display A1 tx voltage rssi with gauge

Download

This telemetry script plots each flight for review before the next launch.

Based on the script of filago (http://rcsettings.com/index.php/viewdownload/13-lua-scripts/217-dlg-flight-graph-for-opentx-2-0-x)

Download

This script is for F3X sailplanes with flaps. It allows the pilot to adjust snapflap deadband using a transmitter control (typically S1/S2).

- Deadband adjustable via transmitter control

- Elevator position for max snapflap can be altered

- Drop-in replacement for a conventional snapflap mix

- Fully documented code

Download

A updated more customisable user-friendly version of the original Simple Background Music Player.

Download

1. Anzeige der Höhe + max
2. Anzeige RSSI als Balken (keine Grafiken ....
   
   
   

Download

Download

This telemetry script monitors some key values concerning electric powered aircraft.  It is telem7 for my use  and must be in /SCRIPTS/modelname/telem1-to-7

USE THE DATA WITH CAUTION!

Download

use switch H to play sounds in a sequence, each time it is pulled next sound file in list is played, long press resets.

1.3 updated to allow changing to logical switches by altering one small line of script.

1.2 updated ready for opentx 2.1 update

1.1 repeats cycle and is layed out different;y using a single line for input of sound files.

can be a function lua ....

Download

F3K Training script   3.02

This script provides timing for all the F3K tasks except Poker.

Updates in 3.02:

• Added AULD.
• Fixed a regression introduced in 3.00 where a false launch could be detected when running the same task more than ....
  
  
  

Download

GPS Heading calculation script.

Download

by nigelsheffield and on4mj   http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259

this will average the launch heights and ignore thermal climb out value, also give a count of launches and number of launches over 29m.

3.3 has auto correct for altimeter drift, makes its own alt reading which it resets to zero on ....

Download

Launch your F3K plane and the friendly lady announces your launch height.

V1.1 "imperial" units added
V1.2 the lady announces "feet" and not "meter" if switched to imperial  
V1.3 adapted to 2.2.1

Download

FrSky digital telemetry sensors like the FLVS report flight pack cell voltages at 0.01V resolution. You can display this value on telemetry screens, but the voice announcements will round off to the nearest 0.1V. This script gives you the full audible value. Works in 2.1.3.

Download

Displays up to 12s Lipos and the sum of all cells. Receiver voltage and lowest lipo cell voltage from each lipo sensor. Optional RPM and temperature if only on lipo sensor is connected.

Download

Just check RCGROUPS for details and latetst versions

Completely new F3K training scripts, menu driven. 

http://www.rcgroups.com/forums/member.php?u=577751

• Flight altitude graphs
• complete task list
• Created
  Size
  Downloads

Download

Modified #2 Lua from OpenTX website. 

It only requires TX + RX and FLVS (voltage) sensor.Created
Size
Downloads