Download

This gives you up to 6 independent switches which can be toggled in sequence by 2 switches.

Download

Was Change Sensor Id. Lua script to change Frsky sensor configuration from the radio (ported from erskyTx. Thanks to MikeB)

Download

OpenLUA-plane - OpenTx 2.2 - Taranis X9d+

Download

Lua Telemetry Flight Status for Taranis/Horus/Jumper T16 transmitters using FrSky SmartPort(S.Port), D-series, F.Port & TBS Crossfire telemetry.  Compatible with INAV and Betaflight.

Download

Telemetry script with icons for the DJI phantom and NAZA flight controllers. 

Download

sequence caller with sounds for bmfa, same as other but with the sound files you will need for calling bmfa cert tasks.

you may want to download the other version without the sounds too as this will be updated.

Download

use switch H to play sounds in a sequence, each time it is pulled next sound file in list is played, long press resets.

1.3 updated to allow changing to logical switches by altering one small line of script.

1.2 updated ready for opentx 2.1 update

1.1 repeats cycle and is layed out different;y using a single line for input of sound files.

can be a function lua ....

Download

This telemetry script monitors some key values concerning electric powered aircraft.  It is telem7 for my use  and must be in /SCRIPTS/modelname/telem1-to-7

USE THE DATA WITH CAUTION!

Download

This is a "modded" version of the Automatic Cell detection Script.

Use to automatically set the alarm (low and critical) voltages of A1, A2, A3 or A4, dependant on the number of cells used

Updated to work with future releases of Open-TX

Download

Script to "lag" a source.  Collects source and returns it later. set source required.  Set delay required in times - 1 to 100 in steps of approx 30milliseconds.

Download

Modified #2 Lua from OpenTX website. 

It only requires TX + RX and FLVS (voltage) sensor.Created
Size
Downloads

Download

Telemetry screen is based on FrSky FAS-100 Current/Voltage/Consumption/Power Sensor.

-- RSSI
-- Voltage (vFas), minimum voltage (vFas-min)
-- Consumption
-- Current and maximum current
-- Average current based on Consumption and Timer 1 (telem1.lua)
-- Average current based on averaging current samples (telem2.lua)
-- Maximum power

Download

This one-time script help you to calculate the Center of Gravity (COG) of your airplane.

Download

This is a simple Background Music Player which creates a Special Function at the  position of your choice and starts playing 1 out of 10 bgndmusic.wav files as soon as Switch E is in the "UP" position. While Switch E is in the "MIDDLE" position, it shuffels around in your array of the 10 music files. See the comments in music.lua to expand your number of files or change the play/shuffel ....

Download

telemtry screen for sail boat like iom 

display A1 tx voltage rssi with gauge

Download

This script is for F3X sailplanes with flaps. It allows the pilot to adjust snapflap deadband using a transmitter control (typically S1/S2).

- Deadband adjustable via transmitter control

- Elevator position for max snapflap can be altered

- Drop-in replacement for a conventional snapflap mix

- Fully documented code

Download

GPS Heading calculation script.

Download

by nigelsheffield and on4mj   http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259

this will average the launch heights and ignore thermal climb out value, also give a count of launches and number of launches over 29m.

3.3 has auto correct for altimeter drift, makes its own alt reading which it resets to zero on ....

Download

Engine Sound Generator [P-51D]

Copy EngSnd.lua file to the SCRIPTS\FUNCTIONS\
*.wav file to the SOUNDS\en\

User need to create Special function "SFx SE- Lua Script EngSnd".
If you turn on "SE-" then script will create SF in SF63.

refer youtube clip for action.

Download

Vario Telemetry Screen

Altimeter, VSpeed gauge, and max/min height

Updated to work on OpenTX 2.1

Download

this telemetry lua by nigelsheffield  http://www.rcgroups.com/forums/showthread.php?t=2237421#post29328259  is a simple increasing timer target game, as is target time starts at 10 seconds and goes up 5 seconds each time target is hit, after 10 hits the game is over and timer 2 value is used to give score.

1.2 fixed ready for changes in opentx 2.1

for it to work you must ....

Download

this telemetry lua nigelsheffield will give a 30 min graph of alt, each time timer 1 is reset the flight time and max alt is recorded, with 6 last flights on left and the 3 best times recorded on right.

1.2 added personal best which saves your best ever time in gvar 6 fm9 which you need to set to -1000 to zero ....

Download

This is a telemetry script to average out your throttle so I can see what my average throttle input is for my quad.

Download

This srcipt alert you when the distance of your airplane and a GPS point is less than a distance.

Download

F3K Training script   3.02

This script provides timing for all the F3K tasks except Poker.

Updates in 3.02:

• Added AULD.
• Fixed a regression introduced in 3.00 where a false launch could be detected when running the same task more than ....