Download

Uses FlySky TX module.

Rates are set at 75% to disable the "auto-flip" mechanism.

Download

Model Setup for DJI Naza-m also tested on a DJI Phantom.

Download

Taranis setup for an Arducopter-based multicoper with Analog battery voltage monitoring, announced flight modes, in-flight parameter tuning, RSSI and flight-battery announcing.

Download

6 Pos switch for APM or alike

Download

This is an example showing camera gimbal control with the aileron/elevator stick when SG is set to the middle position.

This has a basic MultiWii style throttle kill (zero throttle, left yaw) and will need to be adapted for other flight controllers or settings.

Download

Simple config for a KK2-based multicopter with A2 main-battery voltage monitoring.

Download

Naza setup with flight modes, IOC, hover, failsafe, gain, background music, rates and expo.  Includes custom sounds and image with switch references.

Enjoy!

Chris aka imagebuff on rcgroups and fpvlab

Download

MultiWii 6-channel setup with telemetry

Download

Fly your quad with your head!  This model config makes use of the very reliable and accurate FS Trinity head tracker (beta) to actually control the quad's yaw, pitch, and roll! Yes you can simply lean, tilt, and turn your head to fly.  Alot of interesting features and tweaks in this Taranis model config.  Additionally there is alot of programming and interaction with an onboard pan/tilt cam ..

Download

File for TBS Discovery w/Naza and custom switches w/voice

Download

Blade 350qx backup file with fail safe and all 3 modes

Download

Basic setup for Naze32 - Aux1=SE, Aux2=SG

Download

Sticky Throttle Hold

Download

***UPDATE v2.1 with Zenmuse Gimbal support and IOC with Sound***

Fr Sky Taranis setup for DJI F450 with Naza V2

The setup is with sound.

Button SD + for GPS Flightmode

Button SD = for Atti Flightmode

Button ....

Download

Taranis model file for the TBS Discovery Pro. Basic setup to control the Naza, gimbal and camera switch. Using a combination of S.BUS and PWM outputs to fully control the copter.

Changes  in V1.1  (AUG-10-2014)

• Inverted ELE and THR to match the stock settings of the NAZA. If updated from v1.0, ..
  
  
  

Download

Sticky Throttle, Proper throws to enable arming.

Download

Basic Taranis setup for the Walkera QR X350 Pro quad. D/R, telemetry, gimbal control. Sounds  and model image included (could be improved on...).

I am using the D8R-XP receiver (board removed from the case), S-Bus (CPPM) connection to the FC, and a analog Voltage Sensor on A2. Channels 6 and 8 (gimbal control) are connected from the analog channel pins on the receiver to the gimbal ....

Download

Download

Download

This is used on a AD1 quad.  Taranis with x8r in D16 mode, 16 channels.  Frsky lipo monitor. Have 3 rates and different expos on all three. 

6 flight modes, RTL ch7 and Auto tune ch8.  Led lights with steady and blinking by timer ch10.

Amber sounds installed.  Logical switches and special functions to call out flight modes, and battery info.

Download

This is file for a 250 quad using a Thunder KK Pro flight controller and a Spektrum Satellite. Very basic with 2 flight modes. Good file to start with.

Thanks,

Download

Here is 6 flight mode setup that I used. Originally posted by xtagon on rcgroups here. Check the link for a good explanation of the flight modes and switches. Only additions I have are below.

I setup audio files to play for the modes I have selected when they are toggled.

Channel 6 & 7 setup for my gimbal. ....

Download

Yet another quadcopter configuration for Taranis transmitter and 3DR Pixhawk FC.

Created
Size
Downloads

Download

Download

Experimental first draft for the Durafly AutoG2 (NO MODEL HAS FLOWN WITH THIS)