 Overview |
 Search Downloads |
 Submit file |
 Up |
| Category: Helicopters | ||
 Trex 500 CCPM Base Version:OpenTX 2.1.5 
|
|
 This is a base working CCPM eepe for the Trex 500 Electric. You may have to adjust your curves but it is a good base.
|
Created Size Downloads |
2015-11-11 77.03 KB 4075 |
||
| Blade Nano CPS Version:2.1.6
|
|
Configuration designed to work with DSMX module (example tested with ORX DSM2/DSMX Module with push button selectable protocols) in 22ms DSMX (two flashes) mode. All flight modes implemented (stability, 3D/acro, safe) with throttle and pitch curves approximating recommended settings. Expo/Rates for Aileron, Elevator, Rudder set to switch. |
Created Size Downloads |
2015-11-28 76.03 KB 3696 |
||
 Blade nano CPX Version:V0.5
|
|
Model for Blade nano cpx, with timer, idle up and throttle hold. Used with home made dsm2/x module. |
Created Size Downloads |
2015-11-29 190.38 KB 2778 |
||
| Helicopter FBL template Version:V0.75
|
|
Helicopter template for FBL helicopter. 4 Flightmode, Throttle hold, Normal and idleup 1 and 2. Trippel rate, shared switch for Travel limit and Expo for Aileron, Elevator and Rudder. Timer for total flight time and battery. |
Created Size Downloads |
2015-11-30 190.94 KB 3754 |
||
| T-Rex 550L Dominator
|
|
 Setup T-Rex 550L Futaba SBUS style, setup with Brain / Icon Flybarless system
|
Created Size Downloads |
2015-12-06 76.03 KB 2994 |
||
| T-Rex 450L Dominator
|
|
 T-Rex 450L setup Futaba SBUS style, BRAIN / ICON Flybarless System |
Created Size Downloads |
2015-12-06 76.03 KB 3568 |
||
| Blade 130X Version:1.0
|
|
Basic setup (Normal + Idle-Up1 + Idle-Up2) for Horizon Hobby Blade 130X based on the default values described in the user guide. Read the detailed description for the switch description. |
Created Size Downloads |
2015-12-23 77.03 KB 2965 |
||
| T-Rex600ProFBLv2 (V-Stabi, SBus, Taranis X9E) Version:1
|
|
Taranis X9E with X6R connected by SBUS to V-Stabi 5.2 |
Created Size Downloads |
2016-01-25 77.03 KB 2752 |
||
| Heli Tracker.eepe Version:6
|
|
I'm putting this out there hopefully to help. It is my eePe file for my Taranis Plus, X8R and Ikon setup. I am also using version 2.1.7. I have not flight tested yet due to waiting for parts. But a bench test showed everything working.
|
Created Size Downloads |
2016-02-01 77.03 KB 2103 |
||
| Thunder Tiger Raptor 30 v1
|
|
Thunder Tiger Raptor 30 v1 with OS .37 engine and Futaba GY401 gyro.
|
Created Size Downloads |
2016-10-01 77.03 KB 2440 |
||
| Miniature Aircraft X-Cell 46
|
|
Miniature Aircraft X-Cell Helicopter with OS .46, Futaba GY401 Gyro. |
Created Size Downloads |
2016-10-01 77.03 KB 1910 |
||
| Taranis with Ikon Version:Final
|
|
I've been flying my Gaui X3 with this configuration for quite some time now and it flies great. |
Created Size Downloads |
2016-12-26 77.03 KB 2209 |
||
| T-Rex 450 SE
|
|
T-Rex 450 SE with Futaba 401 gyro. CCPM configured helicopter. |
Created Size Downloads |
2016-12-26 77.03 KB 3754 |
||
| Blade 180 CFX
|
|
Blade 180 CFX |
Created Size Downloads |
2017-01-31 77.03 KB 2371 |
||
| XK 110 / V977 Taranis Multimodule Version:1.0.0
|
|
Hey! I've made a profile for my XK 110 and taranis with multimodule. Curves copied from original manual. There are 3 modes: Normal, Idle 70% and Idle 100%. I use OpenTX 2.2.0, be aware. |
Created Size Downloads |
2017-09-25 1.13 KB 3468 |
||
| Blade 180CFX Version:2.2
|
|
OpenTX 2.2 model for Blade 180CFX Configured as per Blade 180CFX manual with AUX2 programming.
|
Created Size Downloads |
2017-10-15 955 B 1531 |
||
| Trex-500 Flybar OpenTX 2.2 Taranis Version:OpenTX 2.2
|
|
This is a Flybarred Trex 500 for Taranis running OpneTX 2.2. |
Created Size Downloads |
2017-12-31 917 B 2060 |
||
| Blade 270 Version:1.0
|
|
Setup for Blade 270 Fusion with an Orange module. |
Created Size Downloads |
2018-04-12 828 B 1338 |
||
| 200SRX Version:v1
|
|
Specifically for 200SRX (fixed pitch) |
Created Size Downloads |
2019-01-23 76.01 KB 1372 |
||