![]() |
![]() |
![]() |
![]() |
Category: Helicopters | ||
![]() ![]() |
|
This is a base working CCPM eepe for the Trex 500 Electric. You may have to adjust your curves but it is a good base.
|
Created Size Downloads |
2015-11-11 77.03 KB 5064 |
||
![]() ![]() |
|
Helicopter template for FBL helicopter. 4 Flightmode, Throttle hold, Normal and idleup 1 and 2. Trippel rate, shared switch for Travel limit and Expo for Aileron, Elevator and Rudder. Timer for total flight time and battery. |
Created Size Downloads |
2015-11-30 190.94 KB 4690 |
||
![]() ![]() |
|
T-Rex 450 SE with Futaba 401 gyro. CCPM configured helicopter. |
Created Size Downloads |
2016-12-26 77.03 KB 4628 |
||
![]() ![]() |
|
Basic setup (Normal + Idle-Up1) for T-Rex 500 ESP with Flybar. |
Created Size Downloads |
2014-11-19 77.03 KB 4464 |
||
![]() ![]() |
|
Configuration designed to work with DSMX module (example tested with ORX DSM2/DSMX Module with push button selectable protocols) in 22ms DSMX (two flashes) mode. All flight modes implemented (stability, 3D/acro, safe) with throttle and pitch curves approximating recommended settings. Expo/Rates for Aileron, Elevator, Rudder set to switch. |
Created Size Downloads |
2015-11-28 76.03 KB 4399 |
||
![]() ![]() |
|
![]() T-Rex 450L setup Futaba SBUS style, BRAIN / ICON Flybarless System |
Created Size Downloads |
2015-12-06 76.03 KB 4365 |
||
![]() ![]() |
|
Hey! I've made a profile for my XK 110 and taranis with multimodule. Curves copied from original manual. There are 3 modes: Normal, Idle 70% and Idle 100%. I use OpenTX 2.2.0, be aware. |
Created Size Downloads |
2017-09-25 1.13 KB 4314 |
||
![]() ![]() |
|
Trex 450 heli with flymentor. I included my soundfiles for FM postionmode FM balance mode FM off. as well as the other files i use for flightmode normal flightmode idle up and so on. |
Created Size Downloads |
2014-05-11 1.16 MB 3876 |
||
![]() ![]() |
|
![]() Setup T-Rex 550L Futaba SBUS style, setup with Brain / Icon Flybarless system
|
Created Size Downloads |
2015-12-06 76.03 KB 3663 |
||
![]() ![]() |
|
Basic setup (Normal + Idle-Up1 + Idle-Up2) for Horizon Hobby Blade 130X based on the default values described in the user guide. Read the detailed description for the switch description. |
Created Size Downloads |
2015-12-23 77.03 KB 3636 |
||
![]() ![]() |
|
Helicopter with normal Swash plate. Throttle Cut - Flight Mode Throttle Hold with Throttle hold Delay - Flight Mode Normal (When 15% of stick governor enable at 1600 rpm) - Flight Mode Idle Up1 (governor enable at 1800 rpm)- Flight Mode Idle Up2 (governor enable at 1900 rpm). Governor On Off switch - Gyro On Off switch (Normal - AVCS). Fail safe all return to center. |
Created Size Downloads |
2015-11-06 77.03 KB 3565 |
||
![]() ![]() |
|
Model for Blade nano cpx, with timer, idle up and throttle hold. Used with home made dsm2/x module. |
Created Size Downloads |
2015-11-29 190.38 KB 3501 |
||
![]() ![]() |
|
Taranis X9E with X6R connected by SBUS to V-Stabi 5.2 |
Created Size Downloads |
2016-01-25 77.03 KB 3315 |
||
![]() ![]() |
|
Thunder Tiger Raptor 30 v1 with OS .37 engine and Futaba GY401 gyro.
|
Created Size Downloads |
2016-10-01 77.03 KB 3160 |
||
![]() ![]() |
|
![]() Blade mCP X |
Created Size Downloads |
2013-06-24 76.03 KB 3107 |
||
![]() ![]() |
|
Blade 180 CFX |
Created Size Downloads |
2017-01-31 77.03 KB 2939 |
||
![]() ![]() |
|
Gaui X3 SBUS (Futaba Channel Order) with BD3SX SH: Captain Rescue LS: Volume Control S1: Self-level S2: Tail Gain Adjustment SE / SB: Flight Modes (4 Flight Modes + Normal SC: High, Middle, Low Rates AMP and Voltage telemetry sensors |
Created Size Downloads |
2014-08-05 77.03 KB 2931 |
||
![]() ![]() |
|
Synergy E5 SBUS (Futaba Channel Order) with BD3SX SH: Captain Rescue LS: Volume Control S1: Self-level S2: Tail Gain Adjustment SE / SB: Flight Modes (4 Flight Modes + Normal SC: High, Middle, Low Rates AMP and Voltage telemetry sensors |
Created Size Downloads |
2014-08-05 77.03 KB 2878 |
||
![]() ![]() |
|
ArchmageAU sent great info about Taranis programming for Helis. Created |
2014-10-17 77.03 KB 2841 |
||
![]() ![]() |
|
![]() WLToys V911 |
Created Size Downloads |
2013-06-24 76.03 KB 2831 |
||
![]() ![]() |
|
blade nano cpx |
Created Size Downloads |
2014-03-16 9.53 KB 2809 |
||
![]() ![]() |
|
![]() ![]() |
|
I've been flying my Gaui X3 with this configuration for quite some time now and it flies great. |
Created Size Downloads |
2016-12-26 77.03 KB 2775 |
||
![]() ![]() |
|
This is a Flybarred Trex 500 for Taranis running OpneTX 2.2. |
Created Size Downloads |
2017-12-31 917 B 2730 |
||
![]() ![]() |
|
![]() Blade 130X |
Created Size Downloads |
2013-06-24 76.03 KB 2723 |
||