![]() |
![]() |
![]() |
![]() |
Category: Helicopters | ||
![]() ![]() |
|
Setup for Blade 270 Fusion with an Orange module. |
Created Size Downloads |
2018-04-12 828 B 1912 |
||
![]() ![]() |
|
Specifically for 200SRX (fixed pitch) |
Created Size Downloads |
2019-01-23 76.01 KB 1976 |
||
![]() ![]() |
|
Template for a Minititan E-325. Inside file there are a txt. Please read first. Contains all helicopter hardware configuration and Taranis configuration. eepe is inside this zip file. There are spanish sounds for Flight Phase, Engine Warning and Giro Connection and disconection switch.
Enjoy it. |
Created Size Downloads |
2014-04-13 363.44 KB 2007 |
||
![]() ![]() |
|
OpenTX 2.2 model for Blade 180CFX Configured as per Blade 180CFX manual with AUX2 programming.
|
Created Size Downloads |
2017-10-15 955 B 2150 |
||
![]() ![]() |
|
This is a basic template for a stock V922 with external HT8/HT6 module plugged in the trainer port. SC controls the idle-up. In the top position it is idle-down. SC middle or down is idle-up.
It has sticky throttle-cut and once the throttle-cut has been applied then SC must be set in the up position and the throttle must be zero to release. |
Created Size Downloads |
2014-02-25 76.03 KB 2167 |
||
![]() ![]() |
|
![]() ![]() |
|
![]() Bavarian Demon BD3SX FBL Unit with Futaba Channel Order (Using SBUS) Bailout on SH |
Created Size Downloads |
2014-01-03 77.03 KB 2215 |
||
![]() ![]() |
|
![]() Skyartec Wasp 100 Nano CP |
Created Size Downloads |
2013-06-24 76.03 KB 2216 |
||
![]() ![]() |
|
![]() Bavarian Demon BD3SX FBL Unit with Futaba Channel Order (Using SBUS) Bailout on SH Sticky Throttle Hold |
Created Size Downloads |
2014-01-03 77.03 KB 2321 |
||
![]() ![]() |
|
v912 |
Created Size Downloads |
2014-04-06 77.03 KB 2423 |
||
![]() ![]() |
|
Miniature Aircraft X-Cell Helicopter with OS .46, Futaba GY401 Gyro. |
Created Size Downloads |
2016-10-01 77.03 KB 2425 |
||
![]() ![]() |
|
9958 4ch heli |
Created Size Downloads |
2014-04-06 77.03 KB 2427 |
||
![]() ![]() |
|
![]() BLHeli brushless WLToys V922 or Turnigy FBL100 |
Created Size Downloads |
2013-06-24 76.03 KB 2448 |
||
![]() ![]() |
|
FBL heli setup |
Created Size Downloads |
2013-08-26 77.03 KB 2470 |
||
![]() ![]() |
|
Hurricane Helicopter settings. FM phases (Hover, Trans and Acro)(SE), with throttle stick block (SF) and Cut glow engine with full closed carburetor (SH). Gyro connect and disconnect (SC).
Enjoy It.
P.D. Voices in Spanish |
Created Size Downloads |
2014-05-01 5.81 MB 2593 |
||
![]() ![]() |
|
v911 |
Created Size Downloads |
2014-04-06 77.03 KB 2651 |
||
![]() ![]() |
|
I'm putting this out there hopefully to help. It is my eePe file for my Taranis Plus, X8R and Ikon setup. I am also using version 2.1.7. I have not flight tested yet due to waiting for parts. But a bench test showed everything working.
|
Created Size Downloads |
2016-02-01 77.03 KB 2653 |
||
![]() ![]() |
|
![]() Spektrum Satellite Sticky Throttle Hold |
Created Size Downloads |
2014-01-03 77.03 KB 2672 |
||
![]() ![]() |
|
![]() Blade 130X |
Created Size Downloads |
2013-06-24 76.03 KB 2687 |
||
![]() ![]() |
|
Example mechanical helicopter setup. |
Created Size Downloads |
2013-08-24 76.03 KB 2688 |
||
![]() ![]() |
|
This is a Flybarred Trex 500 for Taranis running OpneTX 2.2. |
Created Size Downloads |
2017-12-31 917 B 2693 |
||
![]() ![]() |
|
I've been flying my Gaui X3 with this configuration for quite some time now and it flies great. |
Created Size Downloads |
2016-12-26 77.03 KB 2743 |
||
![]() ![]() |
|
![]() ![]() |
|
blade nano cpx |
Created Size Downloads |
2014-03-16 9.53 KB 2775 |
||
![]() ![]() |
|
![]() WLToys V911 |
Created Size Downloads |
2013-06-24 76.03 KB 2801 |
||