R/C Settings
DJI NAZA w/ extras! Version:2.0 |
|
|
Naza setup with flight modes, IOC, hover, failsafe, gain, background music, rates and expo. Includes custom sounds and image with switch references.
Enjoy!
Chris aka imagebuff on rcgroups and fpvlab
|
|
Data
|
Size |
1.54 MB |
Downloads |
6017 |
Created |
2013-08-29 |
Created by |
imagebuff |
Changed at |
|
Modified by |
|
|
|
|
|
|
|
You have no rights to post comments
Comments
Thanks for making my life easier ;)
There was one incident though, I had hover switch ON when battery fail-safe triggered and copter started going down, in panic it slipped my mind that the switch is on but as throttle midpoint went higher I couldn't increase or importantly decrease it to land...so a very minor crash.
This gave me some ideas:
1. A reminder plays after, say every 30 seconds
2. Adding a throttle cut option.
3. Adding an option that if voltage drops below xx.x then hover mode gets off.
Thanks again for such a big help.
This had made setting my Taranis so much easier and could have never taken it to the level you did with all the extras
thanks for sharing this hard with us
You may be interested in the other config file here "Head tracker controlled NAZA Quad" as it has some gimbal control features. It should be similar or the same for the zenmuse gimbal.
would it by possible to add Zenmuse gimbal control in to this template?
Thank you for info
RSS feed for comments to this post