R/C Settings
Overview Search Downloads Submit file Up
Download details
Eleven Models Version:2-15-2014
(1 vote)

Lucky Lady

-          Modified AstroHog is a low wing model with a 72” wingspan, OS 70 Surpass engine, and Flaperons.

-          Timer 1 & 2 set with THs

-          THR is set up with a curve to take advantage of full servo movement

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix using SB is used for Flaperons with rates at 100%, 75% and 50%.  Slow 2 seconds.

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          Mix using SH is THR cut

-          CHL 1, 2, and 4 are inverted

-          Custom Switches CS2 and CS3 are set as mixes to delay reading of track in mid positions unless mid position held for 0.5 seconds.

-          S1 used as volume control

-          SHs used to reset timer (in addition to THR Cut)

 

DE Havilland Beaver

-          Electric foam model is a high wing with a 59.5” wingspan and flaps

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix with SB is used for Flaps with 2 second slow feature

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS2 is set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SHs used to reset timer

-          SF is used to start/stop Telemetry log

 

Ultra Stick 40

 

-          Stick ARF with 58” wingspan, OS 70 Surpass engine, and flaps

-          Timers 1 & 2 set with THs

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix with SB is used for Crow SB↑; AIL-FLP combination SB-; and Normal flight SB↓ with Flaps on the LS using a curve and CS 1 and CS2

-          THR is set on a curve to allow for THR Cut.

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          Mix using SH is THR cut

-          CHL 3, 4, 6, 7 are inverted

-          CS3 is set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF is used a Safety throttle for THR.

-          S1 controls speaker volume

-          SHs resets timer

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

 

Ultra Stick Gas

-          Stick ARF with 76” wingspan, DLE 20cc gas engine, and flaps

-          Timers 1 & 2 set with THs

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix with SB is used for Crow SB↑; AIL-FLP combination SB-; and Normal flight SB↓ with Flaps on the LS using a curve and CS 1 and CS2

-          THR is set on a curve to allow for THR Cut.

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          Mix using SH is THR cut

-          CHL 3, 4, 6, 7 are inverted

-          CS3 is set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF is used a Safety throttle for THR.

-          S1 controls speaker volume

-          SHs resets timer

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SD set up for background music

  

P-40 Warhawk

-          Electric foam model with 55.25” wingspan, retracts and flaps

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          Flaps are a mix on CHL 5

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30% except THR which is 20%. Rates at 100%, 80%, and 60%

-          CHL 1, 2, 4, and 6 are Inverted

-          Mix with SB is used for Flaps with 2 second slow feature

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS2 and CHL 7 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SA control start/stop Log of Telemetry

-          SHs used to reset timer

-          SF is used to start/stop Telemetry log

 

P-47D Thunderbolt

-          Balsa/Ply model with 63” wingspan, Saito 150 4-Stroke, retracts and flaps

-          Timer 1 & 2 set with THs

-          THR is not set up with a curve

-          CS1 is set for the bomb drop on CHL 9

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix using SB is used for Flaps with rates at -125%, -50% and 25%.  Slow 1 second.

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          Mix using SH is THR cut

-          CHL 2 and 5 are inverted

-          Custom Switches CS3 and CS4 are set as mixes to delay reading of track in mid positions unless mid position for Flaps and Rates are held for 0.5 seconds.

-          S1 used as volume control

-          SH↓s used to reset timer (in addition to THR Cut)

-          SD controls background music

-          SA↑ raises Landing Gear and starts Telemetry Log

 

P-51D Mustang

-          Electric foam model with 57” wingspan, retracts and flaps

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          Flaps are a mix on CHL 5

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30% except THR which is 20%. Rates at 100%, 80%, and 60%

-          CHL 2, 4, and 5 are Inverted

-          Mix with SB is used for Flaps with 2 second slow feature

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS2 and CHL 6 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF↓t set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SA control start/stop Log of Telemetry

-          SH↓s used to reset timer

-          SF is used to start/stop Telemetry log

-          SD controls background music

 

Messerschmitt Bf109F

-          Electric foam model with 42.5” wingspan and flaperons

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30% except. Rates at 100%, 80%, and 60%

-          CHL 1 is Inverted

-          Mix with SB is used for Flaperons with 2 second slow feature

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS2 and CHL 15 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF↓t set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SA control start/stop Log of Telemetry

-          SH↓s used to reset timer

-          SF is used to start/stop Telemetry log

 

F4F Wildcat

 

-          Electric foam model with 38” wingspan and flaperons

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30% except. Rates at 100%, 80%, and 60%

-          Mix with SB is used for Flaperons with 2 second slow feature

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS2 and CHL 15 are set to prevent playing track Flaps 50% unless SB- is held for at least 0.5 seconds

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF↓t set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SA control start/stop Log of Telemetry

-          SH↓s used to reset timer

-          SF is used to start/stop Telemetry log

 

Reaktor 3D

-          Electric foam model with 31.5” wingspan

-          Timers are set with CS1 which does not start the timers until THR is on at least 5%

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30% except. Rates at 70%, 50%, and 350%

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          CS3 and CHL 16 are set to prevent playing track Mid-Rates unless SC- is held for at least 0.5 seconds

-          SF↓t set with a toggle function so that it must turned on-off-on before THR is active

-          S1 used as volume control

-          SA control start/stop Log of Telemetry

-          SH↓s used to reset timer

-          SF is used to start/stop Telemetry log

  

Piper Cub

-          Balsa/Ply model with 76” wingspan and Flaperons

-          Timer 1 & 2 set with THs

-          THR is set up with a curve to take advantage of full servo movement

-          SC is used for Triple Rates and Exponential for RUD, AIL and ELE.  Expo set at 30%. Rates at 100%, 80%, and 60%

-          Mix using SB is used for Flaperons with rates at 100%, 75% and 50%.  Slow 2 seconds.

-          Mix using SG is used for THR-ELE mix providing up to 15% ELE as THR increases

-          Mix using SE is used for THR-RUD mix providing up to 10% right rudder as THR increases

-          Mix using SH is THR cut

-          CHL 2 and 4 are inverted

-          Custom Switches CS2 and CS3 are set as mixes to delay reading of track in mid positions unless mid position held for 0.5 seconds.

-          S1 used as volume control

SHs used to reset timer (in addition 




Data

Size 77.03 KB
Downloads 1794
Created 2014-02-15
Created by Tbolt65
Changed at
Modified by

View Model Details

Download

Comments   

 
#2 gary vinten 2014-10-06 21:19
is there any sound files for the above lucky lady
 
 
#1 jason mohar 2014-04-24 03:15
do you have the sound files to go with this?
 

You have no rights to post comments